Search Recalls
Search by VIN for an instant check, or filter by make, model, year, or category.
866 recalls found
REC-000557
active0 Honda VFR 1200
Due to an incorrect assembly procedure at the factory, the driveshaft bearings may overheat and deteriorate, causing them to fail.
Motorcycle
17 Dec 2015
REC-003676
active0 SUZUKI SFV650L4 & SFV650UL5 MOTORCYCLES
Suzuki Motor Corporation wishes to advise that the fuel tank breather hose may not have been positioned correctly during the production process.
Motorcycle
14 Dec 2015
REC-003665
active0 SUZUKI GSX-S1000A/FA & GSX-R1000A
The front brake caliper may exhibit some fluid leakage due to an uneven piston seal surface, caused by entry of the outer coating treatment into the piston bore during production.
Motorcycle
18 Nov 2015
REC-003558
active0 SUZUKI GSX-R1000
The front brake caliper may exhibit some fluid leakage due to an uneven piston seal surface, caused by entry of the outer coating treatment into the piston bore during production.
Motorcycle
17 Nov 2015
REC-000638
active0 INDIAN FULL SIZE MOTORCYCLES
The Rear Brake Master Cylinder piston seal could develop a tear.
Motorcycle
9 Nov 2015
REC-000262
active2014–2016 DUCATI Multistrada 1200 and 1200S
The side stand for supporting the parked motorcycle in an upright position could break at the joining weld.
Motorcycle
4 Nov 2015
REC-000555
active0 Honda GL 1800
After prolonged exposure to certain types of brake fluid, a reaction may occur between the fluid and the brake hose material. The resultant 'residue' can obstruct the return gallery of the secondary brake master cylinder, causing it to bind and overheat.
Motorcycle
30 Oct 2015
REC-000598
active2015 HUSQVARNA FC 250, FE 250, 350, 450
Deviations in the manufacturing process of the supplier of the M12 aluminium fuel pump nut can result in insufficient sealing and cause uncontrolled fuel leakage on affected motorcycles.
Motorcycle
21 Oct 2015
REC-000812
active2014–2015 KTM KTM Sportmotorcycle
Deviations in the manufacturing process of the moulded fuel hoses can cause problems including uncontrolled fuel leakage at the bends or at the ends.
Motorcycle
21 Oct 2015
REC-000813
active2015 KTM KTM Sportmotorcycle
Deviations in the manufacturing process of the supplier of the M12 aluminium fuel pump nut can result in insufficient sealing and cause uncontrolled fuel leakage on affected motorcycles.
Motorcycle
21 Oct 2015
REC-000811
active2011–2015 KTM KTM Sportmotorcycle.
In certain cases there may be problems with the tank breather in individual cases.
Motorcycle
20 Oct 2015
REC-000755
active2009–2015 KAWASAKI Vulcan 1700 Voyager/Vaquero
The ignition switch wire may rub on the underside of the fuel tank and cause a possible electrical short, damaging the ignition switch.
Motorcycle
17 Sept 2015
REC-003650
active0 BMW BMW G 650 GS & G 650 GS Sertao
Software issues in the BMS-E engine management ECU, and the possibility of an air leak due to a loose intake stub, may cause the engine to stall.
Motorcycle
16 Sept 2015
REC-003648
active0 HARLEY DAVIDSON XG500 and XG750
These motorcycles may have a poor seal at the fuel pump inlet. This could allow an interruption to the fuel supply under acceleration at low fuel levels, possibly before the low fuel light indicator has illuminated.
Motorcycle
17 Aug 2015
REC-001540
active0 YAMAHA YZF-R3A (RH072)
The handle crown on some YZF-R3A models may crack under normal riding conditions due to a casting problem that occurred during the manufacturing process.
Motorcycle
10 Aug 2015
REC-000553
active0 Honda CBR500R/CB500F
The float arm on the fuel pump level gauge may break off, due to reduced strength during usage.
Motorcycle
28 July 2015
REC-000552
active0 Honda 400cc to 1300cc MOTORCYCLES
Excessive sealant may have been applied to the starter solenoid during manufacture.
Motorcycle
16 July 2015
REC-003642
active0 HARLEY DAVIDSON TOURING MOTORCYCLES
The spring wire in the saddlebag mounting receptacle may not maintain adequate tension, allowing the mounting stud to possibly disengage from the receptacle.
Motorcycle
15 July 2015
REC-000554
active0 Honda 250cc to 650cc MOTORCYCLES
Excessive sealant may have been applied to the starter solenoid during manufacture.
Motorcycle
15 July 2015
REC-000804
active2013–2015 KTM 1290 Super Duke
Due to deviations in the manufacturing process, the internal overflow pipe in some fuel tanks may not be completely enclosed by plastic. This may lead to a fuel leak.
Motorcycle
6 July 2015